DOWN-HOLE TRITIUM IN WATER DETECTOR
Model # SSS-33DHC
Model # SSS-33DHC-4
FEATURES:
- SENSITIVE BELOW EPA CLEAN DRINKING WATER LEVELS
- FITS IN CPT BORE HOLE
(CONE PENETRATION)
- CONTINUOUS MONITORING
- REAL TIME
- NOT INFLUENCED BY OTHER NUCLIDES
- NO LIQUID SCINTILLANT REQUIRED
APPLICATION:
- EARLY DETECTION OF UNDERGROUND PLUME OR TRITIUM
LEAKAGE
- REASSURE THE PUBLIC BY CONTINUOUS
MONITORING OF DRINKING WATER SOURCES
DETECTORS & DETECTION FLOW-THRU CELL:
There are many thousands of bore holes in the United States
which could or should be monitored for tritium. The water in these
bore holes cover a wide range of tritium concentrations. From highly
contaminated to very clean.
Current bore hole sampling and lab test methodology, take
a sample and send it to the lab, is very sensitive; but extremely
expensive and slow.
Technical Associates SSS-33DHC Detectors
automate, (and bring down the cost) of monitoring these bore holes. |
SSS-33DHC
|
DESCRIPTION: This System consists
of a small diameter, water tight detector assembly with pump plus
processor. The sample is passed through a deionizer and filter and
thence to the scintillation crystals in the flow cell which is viewed
by a matched pair of photomultiplier tubes.
The process portion of this system conditions and analyzes
the output from the photomultiplier tubes by pulse height and coincidence,
thereby permitting the system to eliminate counting most background
and noise counts. Sensitivity is enhanced by use of stochastic resonance
plus high gain, low noise PM tubes, and preamps.
SUB-SYSTEMS: Down-hole tritium measurement
system involves the following subsystems.
Sonde-casing, sample water filtration & deionization pump,
detectors & detection flow thru cell, plumbing, preamplifiers, amplifiers
& electronic pulse analysis, detector bias supply, cables, data presentation,
storage & transmission, and system power.
The electronics displays count-rate, total count and elapsed
count time at the well head. The data is transmitted in RS-232 format.
Data is printed out on a digital printer with date and time stamp.
TA TECHNICAL
ASSOCIATES
7051 ETON AVENUE * CANOGA PARK, CA 91303
TELEPHONE
(818) 883-7043 * FAX(818) 883-6103
e-mail:
tagold@nwc.net www.tech-associates.com
DOWN-HOLE TRITIUM IN WATER DETECTOR
Model # SSS-33DHC
Model # SSS-33DHC-4
SPECIFICATIONS (Continued):
- Sensitivity: 1 nanoCurie/ml in 100 seconds.
LLD is better than the FDA drinking water standard which is
20,000 pCi/L (0.02nCi/ml) averaged over 24 hours.
- Range: 0-1000 nanoCuries/ml.
- Pumping Frequency: Typical - Twice per
day.
- Above Ground Dimensions: 13'' H x 21''
W x 20'' D. (Larger for weather house version.)
- Weight (Standard Unit): Detector Housing:
30 lbs.
Shipping: 100 lbs.
- Detector Sonde Contains: The flow path
(plumbing) all wetted parts are stainless steel or chemically inert
materials.
Replaceable Particulate Filter Cartridge.
Replaceable Deionizer Cartridge.
Stainless Steel Sonde allows easy cleaning & maintenance.
Pump which operates even at deep underground/underwater 1800
psi. Ambient
Scintillation Cell.
Dual PM Tubes.
Dual Pre-amps.
Cabling.
Other Electronics.
- Filtration: Filters easily cleaned/recharged/replaced
in the filed. The Technical Associates tritium detection sonde contains
a 400cc screw-in replaceable cartridge consisting of two stages. The
lower stage has glass wool and, Optional,
micro-pore alumina ceramic filter for removal of particulates and
gelatinous contaminants. The upper filter contains deionizer beads
to remove dissolved salts and metals from the sample water. The user
has the option to refill the plastic filter cartridge or to replace
the plastic filter cartridge with pre-filled replacements. Both of
which are low cost. The current clear-plastic filter housing allows
the user to visually inspect the filter contents without opening the
filter. This gives very useful information on whether filter change
interval can be increased in the future for that location due to its'
local ground water quality.
- Options: Higher Temperature for sample
or above ground electronics.
Other output interface.
Other ranges.
Addition of Strontium90 Detector.
6 Digit LED Display.
Conductivity Detectors to learn more about the ground water
and to tell when ion exchange beads need replacing.
Dry Hole Detector.
Depth/Cable Length.
Well head display electronics mounted in weather-tight housing.
Data stored electronically at site.
Data transmitted periodically (twice a day) to a distant data
collection lab.
TA TECHNICAL
ASSOCIATES
7051 ETON AVENUE * CANOGA PARK, CA 91303
TELEPHONE
(818) 883-7043 * FAX(818) 883-6103
e-mail:
tagold@nwc.net www.tech-associates.com
DOWN-HOLE TRITIUM IN WATER DETECTOR
Model # SSS-33DHC
Model # SSS-33DHC-4
Optional Back-Flushing: To periodically
reverse the direction of the pump flow, so as to flush the filters
and thereby further extend the time between filter replacement.
| ENVIRONMENTAL: |
SSS-33DHC |
SSS-33DHXT |
SSS-33DHC4 |
| Detector: |
|
|
|
| Sample Temperature: |
35 to 122 F |
35 to 135 F |
35 to 122 F |
| Ambient Temperature: |
35 to 122 F |
35 to 135 F |
35 to 122 F |
| Ambient Pressure: |
0-100 psi |
0-1800 psi |
0-100 psi |
| Humidity: |
Submerged Operation |
Submerged Operation |
Submerged Operation |
| Diameter: |
1.75'' |
1.75'' |
3.5'' |
| Recommended for Hole Diameter: |
CPT |
CPT |
4'' |
| Max. Deployment Depth: |
160 ft. |
5,000 ft. |
160 ft. |
| Material Construction: |
Stainless Steel |
Stainless Steel |
Stainless Steel |
| Above Ground Interface and Readout: |
|
|
|
| Temperature: |
35 to 100 F |
35 to 100 F |
35 to 100 F |
| Humidity (Non-condensing): |
0-96% |
0-96% |
0-96% |
| Weatherproof (Optional): |
Yes |
Yes |
Yes |
*CPT: Cone Penetrometer Technology is often used
to create 2'' diameter vertical holes in the ground for the purpose
of monitoring soil, vapor, and ground water.
**Below 0oC temperature can be accommodated
by use of optional heat tracing.
TA TECHNICAL
ASSOCIATES
7051 ETON AVENUE * CANOGA PARK, CA 91303
TELEPHONE
(818) 883-7043 * FAX(818) 883-6103
e-mail:
tagold@nwc.net www.tech-associates.com