HIGH VOLTAGE TESTER

DIGITAL D.C.

Model # HV 2000

FEATURES:

* 3 1/2 DIGIT DISPLAY

* DIRECT MEASUREMENT OF H.V. 0-2000 V DC

* HI IMPEDANCE INPUT - 1100 MEGOHM LESS THAN 1$\mu $A DRAIN 
  AT 1000V

* 9 VOLT BATTERY OPERATION

* SHIRT POCKET SIZE

* LIGHTWEIGHT

DESCRIPTION: D.C. High voltage measurements no longer 
require large expensive probe and no longer tie up 
oscilloscope or multimeter. 

This small light-weight H.V. tester gives accurate 
digital readings. It's 1100 megohm input resistance 
prevents tester from loading down the circuit being 
tested. 

Ideal for use in test and calibration of power supplies 
used in televisions , lasers and radiation monitors.
 <Graphic file:hv-2000-img.ps>

Figure 1: HV-2000
 

SPECIFICATIONS:

Display: 3 1/2 digits, 1/2" high, LCD.

Ranges: 0-1000 Volts and 0-2000 Volts.

Input Impedance: 1100 megohm.

Readable: To one Volt on 0-1000 range.

Accuracy: Two volts on 0-2000 range 1% plus 1 digit.

Power: Standard 9 Volt transistor battery.

Battery Life: 200 hours.

Size: 2-3/4" wide x 5 1/2" long x 1-1/8" thick.

Weight: Less than 5 1/2 oz. including battery.

Material: Case is made of rugged PVC.

Controls: Power Switch: On-Off.
Range Switch: x1 (0-999V), x2 (0-1999V).
Calibration Pot: 20 turn precision potentiometers.

Calibration: Each unit supplied with calibration certificate.

Input: BNC/MHV connector bulkhead F.

Cable: BNC to BNC M cable furnished. BNC to Dual "meatball"
 style protected clip leads (Model 3787C36) Optional.

T$_{\textrm{A}}$                                   TECHNICAL ASSOCIATES                                   
------------------------------------------------------------------------------------------
  7051 ETON AVENUE * CANOGA PARK, CA 91303 TELEPHONE (818) 883-7043 * FAX(818) 883-6103   


$Revision: 1.1 $